Kiss Me I’m Irish Wood Shamrock Sign

Oh, do I have a project for you! For this month’s De-stash Challenge, I decided to only use things I already had in my hot mess craft room. Thanks to my superpower of not putting things away properly, I easily spotted some St. Patrick’s Day crafting blanks from last year then to my right some stencil vinyl, and nearby some chalk paint. Now would I have been inspired to make this Kiss Me I’m Irish Wood Shamrock sign if everything had been in its proper place? We’ll never know, lol.
I also had to put my own spin on this old, classic saying by adding my specific Ancestry DNA results. Just saying I’m Irish is too vague, any potential kissers need to know what they’re getting into with Scottish and Swedish in the mix. I’m basically a Viking, right? It might explain why my craft room looks like it’s been pillaged. Anyway, I used a very different technique for coloring the wood this time that I want you to see, so let’s get to it.

Kiss Me I'm Irish Wood Shamrock Sign DIY Craft Tutorial Using Cricut and Ultra Dye

This post contains affiliate links, which means we receive compensation if you click on product or brand links and purchase anything. For more information, see our Disclosure Policy.

Kiss Me I’m Irish Wood Shamrock Sign Materials

Kiss Me I'm Irish Wood Shamrock Sign Materials 1

Kiss Me I'm Irish Wood Shamrock Sign Materials 2

Kiss Me I’m Irish Wood Shamrock Sign Steps

1: Put some of the Ultra Dye into a small, disposable dish and then use the foam brush to apply a thin coat onto the wood shamrock. I made sure to include the sides and the grooves. Let it dry completely before you spray the sealer. I forgot to spray it and you’ll see what happened in Step 6.

Kiss Me I'm Irish Wood Shamrock Sign Step 1a

Note: that dye will dye anything it touches, including your skin. So unless you want to look like you’re about to Hulk out, wear some gloves.

Kiss Me I'm Irish Wood Shamrock Sign Step 1b

2: While that’s drying, open a new Project in Cricut Design Space and type out the wording. I did it in groups of “Kiss Me” “I’m” “36%” and “Irish” so I could size them, space them, and squeeze the lettering together more easily. I used a font I bought online called “October Twilight.” Once you have everything sized to fit your sign, Group the words and then Weld them.

Kiss Me I'm Irish Wood Shamrock Sign Step 2

3: Be sure to select “Stencil Vinyl” for your material and cut out the lettering. You’ll want a piece of the stencil vinyl big enough to give you a little extra room around the wording so it’s easier to use with the paint.

Kiss Me I'm Irish Wood Shamrock Sign Step 3

4: Weed out the actual words from the stencil vinyl, not the negative space like you usually would.

Kiss Me I'm Irish Wood Shamrock Sign Step 4a

Kiss Me I'm Irish Wood Shamrock Sign Step 4b

5: Use transfer tape to move the stencil over to your sign to make sure it transfers all of the little circles and teardrop shapes from the inside of the lettering. Strips of transfer tape placed over those areas actually work better than using a whole sheet as I did.

Kiss Me I'm Irish Wood Shamrock Sign Step 5

6: Apply the paint to the stencil using a flat edged foam pouncer. You want to work straight up and down to discourage paint from seeping under the edges of the stencil. Also, try to use very minimal paint with each coat. I applied two coats.

Kiss Me I'm Irish Wood Shamrock Sign Step 6a

Oops: Because I forgot to spray a sealer over that dyed wood, guess what happened? Yep, It turned my pretty Linen paint into pale green paint. Sigh. Oh well, the green still looks pretty and I guess I could spin it as a “custom” paint color: 36% Green. Well, maybe it’s more like 15%.

Kiss Me I'm Irish Wood Shamrock Sign Step 6b

7:  Once that white green paint is completely dry, carefully peel back the stencil to reveal your masterpiece. You’ll also need to remove the little, painted centers of some of the letters. Spray it with the sealer again for good measure.

Kiss Me I'm Irish Wood Shamrock Sign Step 7

8: If your shamrock has a hole at the top, cut 12 inches of ribbon and tie it off to make a loop to hang it.

Kiss Me I'm Irish Wood Shamrock Sign Step 8

That’s it! I love the way this Kiss Me I’m Irish Wood Shamrock Sign turned out. That Ultra Dye is really fun to use and I especially love how you can still see the grain of the wood while also adding a splash of color. It says on the container that you can dye wood or natural fibers with it, so I’ll have to experiment with it some more. I just need to take a Sharpie and write “sealer” on every container so I don’t forget. At any rate, this stuff is pretty awesome. So what do you think? Are you curious to try out this dye? Are you also only a certain percentage Irish but still want the St. Patrick’s Day kisses?

Kiss Me I'm Irish Wood Shamrock Sign Complete

new be inspired

Are you on the hunt for some new St. Patrick’s Day themed projects and don’t know where else to look? You should definitely check out All Free Holiday Crafts then, they have crafts for all the holidays, not just Christmas.

Now let’s see all of the other fun de-stash projects from the rest of this month’s co-hosts!

Craft-Destash-FB-TW-Option

C’mon Get Crafty | Purple Hues and Me 

EyeLoveKnots | Stone Cottage Adventures | Across the Blvd

Domestic Deadline | Shoppe No 5 | Modern on Monticello

Salvage Sister and Mister | Sew Crafty Crochet

My Pinterventures | This Autoimmune Life | The Inspiration Vault

 Loading InLinkz ...

Kiss Me I'm Irish Wood Shamrock Sign Feature

Kiss Me I'm Irish Wood Shamrock Sign DIY Craft Tutorial using Cricut and Folk Art Ultra Dye for wood. #cricut #craft #diy #stpatricksday #irish #kissme

About Marie Dabbs

Hi, I'm Marie. I've been obsessed with crafting for most of my life. I love to experiment with new crafting techniques as well as making the classics. Over the years and after three kids involved in various activities, I discovered my other passion, event planning. I love making my own decorations and styling rooms for parties. I'm at my happiest when I can combine crafts and party styling. It's so much fun!

10 thoughts on “Kiss Me I’m Irish Wood Shamrock Sign

  1. Your sign is too cute and perfect for St Patrick’s Day, Marie! I had my dna done too and I’m 31% Irish. I think we all have some Irish in us – that’s why everyone wears green on that day! Ha!

Leave a Reply

Your email address will not be published.

CommentLuv badge